Helpline No UK Mainland 0161 975 0458 Ireland 1800 882912
Web Support www.fascin8.co.uk
Model Number: 40093
18
System Setup
Dialog
When DOWNMIX is set to LT/RT or STEREO, this item is available. Adjust the value of this item to control
the dialog volume.
NOTE: When playing 5.1CH disc, this item can be used to adjust the volume of the speakers.
D.R.C. (Dynamic Range Control)
You can set this item to AUTO, ON or OFF. DRC
is a process that reduces the dynamic range of an
audio signal. Compression is used during sound recording, live sound reinforcement, and
broadcasting to control the level of audio.
DIGITAL AUDIO SETUP
Digital Output
SPDIF/ OFF: There will be no digital audio signal output. (Coaxial off )
SPDIF/ RAW: The digital audio signal output will be in its raw format. Normally, this m ode is used for DTS
& Dolby Digital 5.1 signals.
SPDIF/ PCM: The digital audio signal output will be in PCM format. Normally, this mode is used for audio
CD signals.
LPCM Out
When the DIGITAL OUTPUT is set to SPDIF/ PCM, this option is then available.
Select a sample rating for the digital audio output. There are two options, 48KHz and 96KHz.
NOTE: Some amplifiers don't support 96KHz sampling which will affect the coaxial output.
Channel delay
This item is used to set the delay time for the center, rear speakers and the subwoofer.
Use the direction buttons to select a speaker, center speaker, subwoofer, left surround speaker or right
surround speaker. Then use the direction keys to adjust the distance.
NOTE:
The unit does not support delays for when the distance
between the center or surround speakers and the listener
are longer than that between the front speakers and the listener.
In case the channel delay settings cannot match your speaker
configuration, please set all distance difference to 0cm. If possible
use your receiver/amplifier to set the channel delay.
