Basic Operation
13
4. LCD DISPLAY
5,6. TUNE, SEEK and TRACK BUTTONS
Press the >>| or |<< button brie
fl
y to manually tune up or down for the desired
radio station frequency.
Press and hold >>| or |<< to auto tune up or down.
7.
BAND BUTTON
During radio mode, press the BND button brie
fl
y to select the radio
broadcasting band you would like.
8.
MODE BUTTON
Press the mode button to change between, tuner, disc (when disc is loaded),
SD Card (when SD Card is inserted, USB (when USB device is inserted), BT
READY mode (when the Bluetooth is not connected, it shows as NO CON) and
AUX mode.
9.
MUTE BUTTON
This button turns mute on or o
ff
.
Press the mute button to suppress the loudspeaker temporarily, and press
again to resume listening. You can also exit mute by using MODE, SEL buttons
or the VOL dial on the fascia panel.
10.
AP BUTTON (Auto-Storage/Preset Scan)
If you press and hold the button for more than one second it will scan and
store 6 stations into your presets. You can do this in each band.
11. PRESET STATION MEMORY
You can go to any preset station by pressing one of the buttons marked 1-6. To
store the station that you are currently listening to press and hold the desired
preset location (1-6) until you see the number that you are holding displayed
on screen.
12.
AF (ALTERNATIVE FREQUENCIES) BUTTON
You can turn the AF mode on or o
ff
by brie
fl
y pressing the AF button.
AF Displayed: AF Switching mode is on.
AF Not Displayed: AF Switching mode is o
ff
.
AF Flashing: AF switching mode is, but no RDS information is being received.
