Helpline No. UK/Northern Ireland 01422 263270 Rep. Ireland 1890 812049
Helpline No. UK/Northern Ireland 01422 263270 Rep. Ireland 1890 812049
Helpline No. UK/Northern Ireland 01422 263270 Rep. Ireland 1890 812049
2
27
Installation on a wall
Ö
First of all, rotate the antenna by 180° so that the LNB will face
away from the antenna base.
Ö
Now, flap down the antenna base by 90° using the articulation.
Ö
Then fix the lateral rods with the wing nuts at the left and right
side of the base to get the required stability. The cavities of the
lateral rods must face towards the inside of the base. Now, the
lateral rods rest directly on the base. The spring ring and the plain
washer must be placed between the lateral rods and the wing
nuts. Here, the plain washer rests on the respective lateral rod.
The spring ring must be placed between the plain washer and the
wing nut.
Ö
Now, put the base on the place at which it is to be installed and
mark the position of the four bore holes. In the picture you can
see the holes and the boring distances for the screws:
L
For this installation, you need four screws and four
washers. These pieces are not included in the contents.
