Setting Sound Level Compression
1
Press the SETUP button on the REMOTE control, a menu like the one above will appear on your TV.
2
Press the DOWN DIRECTION button (
) to highlight the "AUDIO SETUP" item.
3
Press the ENTER button to open a new submenu, "DYNAMIC
" is highlighted, press the RIGHT button ( ) to open it.
4
Highlight the choice you want using the UP & DOWN buttons (
&
), press the ENTER button to confirm.
5
To exit, press the SETUP button.
We suggest you leave these settings alone unless you are very experienced with audio settings.
In many listening situations, it is objectionable to allow the sound to become very loud, and thus the loudest sounds must be
compressed downwards in level. Likewise, the very quiet sounds may be inaudible and must be brought upwards in level to be
heard. Dolby Digital satisfies these needs through the dynamic range controlling function. You can select the dynamic level by
the following steps:
Select the dynamic range compression to fit the individual listening situation of the audience. The variable range is FULL,
6/8, 4/8, 2/8 or OFF.
•
FULL
: Audio with fully compressed dynamic range.
•
6/8 to 2/8
: Audio with partially compressed dynamic range.
•
OFF
: Audio with uncompressed dynamic range.
28
NOTE:
The factory's default setting is
OFF
which satisfies most people
's tastes.
NOTE:
In Tuner, AUX 1 and AUX 2 mode, this function is not used.
DivX(R) REGISTRATION
SETTINGS & ADJUSTMENTS
Audio Setup
