TPMC533 User Manual Issue 1.0.1
Page 64 of 107
Bit
Symbol
Description
Access
Reset
Value
23:20
-
Reserved
-
-
19
OU_FRAME_ERR_IRQ_ENA
Enable IRQ at DAC Sequencer Output Unit Frame Error
0: disabled
1: enabled
If enabled, an interrupt is asserted if a Frame Trigger
event occurs, but the configured Number of
Conversions has not been processed so far.
For TPMC533-20R: Reserved
R/W
0
18
TIMING_ERR_IRQ_ENA
Enable IRQ at DAC Sequencer Output Unit DAC Timing
Error
0: disabled
1: enabled
If enabled, an interrupt is asserted when the DAC
Sequencer's Conversion Rate requests the next
conversion, but at least one of the involved DACs is still
busy.
For TPMC533-20R: Reserved
R/W
0
17
DATA_ERR_IRQ_ENA
Enable IRQ at DAC Sequencer Output Unit Data
Underrun Error
0: disabled
1: enabled
If enabled, an interrupt is asserted when the Output Unit
wants to perform a DAC Conversion but the DAC
channels are not properly pre-loaded.
For TPMC533-20R: Reserved
R/W
0
16
RD_DMA_ERR_IRQ_ENA
Enable IRQ at DAC Sequencer DMA Error
0: disabled
1: enabled
If enabled, an interrupt is asserted when the DMA
Controller of the DAC Sequencer faces a PCI Bus
Abort.
For TPMC533-20R: Reserved
R/W
0