Texas Andreas Petersen Smart 3700, User Manual

10 

Contents

Illustrations ..................................................................... 2

Warning symbols ............................................................ 7

Safety instructions ........................................................ 10

Identification of parts .................................................... 10

Assembly ...................................................................... 10

Operating ..................................................................... 11

Adjustment of cutting height ......................................... 11

Cutting method ............................................................. 11

Maintenance ................................................................. 11

Risk of overheating ...................................................... 11

Specifications ............................................................... 11

EC-Declaration of conformity ....................................... 12

 
We congratulate you on your new lawnmower. We are 
convinced, that this machine will live up to your 
expectations. To achive the maximum outcome of your 
machine you should read this manual carefully. That will 
prevent unnessesary trouble. You should pay special 
attention to the safety instructions marked with this 
symbol: 
 

Safety instructions 

•

Never let children or persons who are not instructed 
in the use of the lawn mower use it.  

•

Never use the lawn mower to purposes other than 
those it is designed for.  

•

If you are sick, tired or under influence of alcohol or 
drugs, you should use the lawn mower.  

•

The electric cable must always be complete. A 
cable with defects must never be used. Always 
check the cable before use.  

•

Always pay attention to the electric cable when 
using the lawn mower. 

•

The electric extension cable must have a minumum 
of 1,5mm

2

, max. length 50 metres.  

•

Never lift the machine by pulling the cable.  

•

Always make sure the the lawn is free of stones and 
other objects that might do damage to the blades. 

•

Always use strong foot wear and long pants.  

•

Replace the blades as a set to maintain better 
balance.  

•

Do not use the lawn mower in wet grass. 

•

Take care not to loose foot hold on slopes..  

•

Do not walk backwards when mowing, as the risk of 
falling over is greater, when you walk backwards. 

•

Only use the lawn mover on grass. 

•

The lawn mower must only be started when places 
on grass. Never start the mower when it is on the 
side or lying upside down.  

•

Turn off power completely when: Leaving the lawn 
mower, removing a blockage on the lawn, check, 
clean, change blades or maintain the machine.  

•

Check that all bolts and nuts are securely fastened 
before use.  

•

Replace damages parts before using the lawn 
mower.  

Only use original spare parts. 

Identification of parts 
 
Illustration 1: 

A.  Mower and upper handle 
B. Lower 

handle 

C. Upper 

handle 

D.  Grass collection box 
E.  Mounting bracket (x2) 
F.  Cable strain relief 
G.  Cable clip (x2) 
H.  Screw with circular washer and nut with quick-

release handle (x2) 

I. 

Screw with rectangular washer and quick-release 
handle (x2) 

Illustration 2: 

1.  Switch box with appliance inlet 
2.  Quick release lock 
3. Rear 

flap 

4. Handle 
5. Switch 

bar 

6. Upper 

handle 

7.  Cord strain relief 
8. Lower 

handle 

9. Grass 

bag 

10.  Height adjustment handle 
11. Deck 
12. Mulching plug 

 
Assembly  

Illustration 3: 

Slide the cord strain relief (F) over the lower handle’s 
tube (B) 
 

Illustration 4: 

Insert each end of the lower handle (B) into a mounting 
bracket (E), making sure that the cogs point inwards. 
Slide the mounting bracket over their counterparts on 
the mower. Choose one of three positions for small, 
medium or tall users. Use the screws with rectangular 
washer [I] to fix the lower handle in place. Move the 
cable strain relief (F) to the middle of the lower handle’s 
horizontal part (B). For easy folding, guide the cable 
between motor and switch below (not above) the lower 
handle’s horizontal part [B]. Clamp the upper handle (C) 
to the lower handle and fix it using the screws with 
circular washer (H). Insert the screw from the inside and 
note the order: Handle, Washer, nut with quick-release 
handle. You can rotate release lock to adjust the 
tightness. Fit the handle to the machine body as shown 
in the pictures. Lower handlebar should be fixed to the 
brackets on the machine. The plastic cover is fitted 
outside. Add the washer and then the handle-lock bolt.  
The handle-lock kan be folded in, but be careful not to 
overtight it before pressing it in. After pressed into 
position, it is recommende to tight the bolt further by 
turning it around in closes position. 
 

Illustration 5: 

Attach the cable to the handle with the provided cable 
clips (G)  
 

Illustration 6: 

Slide the plastic profiles over the metal frame. Make 
sure the profiles completely enclose the frame, lest they 
slide off during use. 
 

Illustration 7: 

1.  Raise up the rear flap. 
2.  Hang the collection bag on the hooks