14
5. Operation
1. It is important to have a clean working area. This is for your own safety. Make sure
that the wood is easy to obtain and reach. There should also be good space to
stack the cut wood.
2. Gain good footing and carry all kinds of protection such as guard, safety goggles,
ear protection and gloves.
3. The saw is constructed so that it can saw maximum length of up to 5 meters.
4. Only one piece of wood must be layed on the saw at a time, regardless diameter
(maximum diameter 120 mm), fasten the strap.
5. The wood will be kept in a firm position by the strap and the teeth in the holder.
Thereby the user can use both hands when working with the power saw.
6. Maintenance
Power Saw 2200 is almost maintenance free.
Always store the Power Saw in a dry area. Even though the saw has been treated for rust,
it may start to rust when exposed to too much damp.
Always disconnect the current when adjusting, repairing or maintaining the Power Saw.
Replacing the blade:
1.
Disconnect the current; open the protection shield, outer protection and front
protection.
2.
Use the enclosed tools to loosen the blade - replace the blade
If necessary see point 5 - 10
under”mounting” remember to fasten.
3.
Use only a sharp and complete blade.
7. Specifications
Electric engine
2200 Watt input
230 V / 50Hz
2.850 revolutions per minute
Dimensions (LxWxH)
860 x 940 x 1000 mm
Blade
400 mm
Saw capacity
120 mm
Weight
46 kg
PLEASE READ THE FOLLOWING CAREFULLY
ALL REPAIRS AND REPLACEMENTS MUST BE CARRIED OUT BY AN AUTHORIZED
DEALER AND NOT BY THE PURCHASER. THE PURCHASER ASSUMES ALL RISKS
AND LIABLILITIES ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT OF PARTS THERETO OR INSTALLATION OF THESE.
Due to continued product development Texas A/S preserves the right to improve the
product without improving already sold models.
