Texas Equipment RAZOR 4200Li, User Manual

13 

GB Original instructions 

 
Illustrations ...................................................................  2

Warning symbols .......................................................... 7

Safety .........................................................................  13

Identification of the parts ............................................ 13

Mounting .................................................................... 14

Cable adjustment ....................................................... 14

Battery ........................................................................  14

Charging..................................................................... 14

Operation ................................................................... 15

Blade ..........................................................................  15

Storage and maintenance .......................................... 15

Specifications .............................................................  16

Warranty terms and conditions ................................... 16

CE Declaration of conformity ...................................... 21

Safety 
 
Setup 

Do not put hands or feet near or under rotating 
parts. 

Read this manual carefully. Make sure that you are 
familiar with the different controls, settings and 
handles of the equipment.  

Know how to stop the unit and ensure that you are 
familiar with emergency stop. 

Never allow children or people unfamiliar with 
these instructions to use the machine. Note, that 
local regulations can restrict the age of the 
operator. 

If you feel unwell, tired or have consumed alcohol 
or drugs, do not operate the machine. 

Always inspect the machine before usage Ensure 
that no parts are worn or damaged. 

Replace worn out or damaged elements and bolts 
in sets to preserve balance. 

The operator of the machine is responsible for 
people’s safety.  

Never use the machine near children or animals. 

The operator of the machine is held liable for any 
accidents or hazards to other people and their 
property. 

Thoroughly inspect the area, where the equipment 
is to be used, if necessary remove any  foreign 
objects.  

Boots with non-slip soles with steel jacket is 
required. Avoid loose-fitting clothes. 

Operation 

After striking a foreign object, stop the engine 
immediately and inspect the machine thoroughly 
for damage. Repair the damage before continuing. 

If the machine should start to vibrate abnormally, 
stop the engine and check immediately for the 
cause. Vibration is generally a warning of damage. 

Always turn off the engine and ensure that all 
moving parts have come to a complete stop before 
making any repairs, adjustments, or inspections.  

Exercise extreme caution when operating on 
slopes.  

Never operate the machine at a fast pace.  

Do not overload machine capacity by attempting to 
push at too fast a rate. 

Do not carry passengers. 

Never allow any bystanders in front of unit. 

Only operate the machine at daylight or in fully 
illuminated areas.  

Ensure a stable foothold and always keep a firm 
hold on the handles. Always walk, never run. 

Do not operate the machine when barefoot or 
wearing sandals. 

Exercise extreme caution when changing direction 
on slopes  

Never attempt to make any adjustments, while the 
engine is running. 

Use extreme caution when reversing or pulling the 
machine backwards 

Due to vibrations from the handle, long time use 
can result in white fingers. 
If fatigue is felt in arms, hands or fingers – or visible 
signs of white fingers is appearing, the work should 
be stopped immediately, and a sufficient time of 
break should be taken for recovery. To avoid white 
fingers, each user should operate the machine for 
no more than 1.5 hours per day. 

Maintenance and storage 

The engine shall be stopped when carrying out 
maintenance and cleaning operations, when 
changing tools and when being transported by 
means other than under its own power. 

Check regularly that all bolts and nuts are 
tightened. Retighten if necessary. 

The engine must be completely cooled before 
storing indoors or covered. 

If the machine unused for a period of time, please 
refer to the instructions in this manual.  

Maintain or replace safety and instruction labels, as 
necessary. 

Only use orginal spare parts or accessories. If  not 
orginal  parts  or accessories is used, the liablility is 
no longer applied.   

 
Miscellaneous 

Factory-fitted control devices, such as the handle-
mounted clutch cable, must not be removed or 
exposed.

Ensure that the machine is properly secured when 
transported on a flatbed etc. 

Waste electrical products must not be 
disposed of with the household waste. This 
tool should be taken to your local recycling 
centre for safe treatment. 

 
The lawnmower is manufactured according to the latest 
safety requirements. These include a blade brake that 
stops the motor and blade in 3 seconds when the blade 
brake. Every precaution is only effective when it is 
followed exactly. Use the following description when 
you mount your lawnmower. 

 
Identification of the parts 

See Illustration 1 

A. Start 

button 

B.  Handlebar for engine brake 
C.  Handlebar for self-propelled* 
D. Wing 

nut 

E.  Rear discharge guard  
F.  Grass collector  
G. Height 

adjustment 

H. Motor 
I. Battery 

cover 

J. Safety 

key 

 
* Only Razor 4220TR-Li