15
3. Assembly handle
Fit handle to the telescopic tube, make sure the 2 holes on the handle Match 2 holes on
the telescopic tube (Fig 4), fix handle to the telescopic with 2 screws and nuts (Fig.5).
Fig. 4 Fig. 5
4. Assembly extension misting nozzle
Twist off the cap counterclockwise (Fig. 6). Twist on the nozzle clockwise (Fig.7)
Fig.
6
Fig. 7
5. Fit spray gun set to the machine body.
Unscrew the fill cap, put pickup tube into tank through the fill hole. Screw the fill cap on
(Fig.7)
Put the spray gun to the holster (Fig.8) and tighten the fixing tape (Fig,9)
Fig. 7 Fig 8 Fig 9
