Chapter 3: Function Graphing
67
You can store a picture of the current graph display to any of 10 graph picture variables (
Pic1
through
Pic9
, and
Pic0
; Chapter 8). Then you can superimpose one or more stored pictures onto
the current graph.
Setting the Graph Modes
Checking and Changing the Graphing Mode
To display the mode screen, press
z
. The default settings are highlighted below. To graph
functions, you must select
Func
mode before you enter values for the window variables and before
you enter the functions.
The TI-84 Plus has four graphing modes.
•
Func
(function graphing)
•
Par
(parametric graphing; Chapter 4)
•
Pol
(polar graphing; Chapter 5)
•
Seq
(sequence graphing; Chapter 6)
Other mode settings affect graphing results. Chapter 1 describes each mode setting.
•
Float
or
0123456789
(fixed) decimal mode affects displayed graph coordinates.
•
Radian
or
Degree
angle mode affects interpretation of some functions.
•
Connected
or
Dot
plotting mode affects plotting of selected functions.
•
Sequential
or
Simul
graphing-order mode affects function plotting when more than one function
is selected.
Setting Modes from a Program
To set the graphing mode and other modes from a program, begin on a blank line in the program
editor and follow these steps.
1. Press
z
to display the mode settings.
2. Press
†
,
~
,
|
, and
}
to place the cursor on the mode that you want to select.
3. Press
Í
to paste the mode name to the cursor location.
The mode is changed when the program is executed.
