Quick-Start Guide
4
SLAU715 – February 2017
Copyright © 2017, Texas Instruments Incorporated
ADC08060 Evaluation Module
2
Quick-Start Guide
This section guides the user through the EVM test procedure to obtain a valid data capture from the
ADC08060EVM using the TSW1400EVM capture card. This should be the starting point for all
evaluations.
2.1
Software Installation
The proper software must be installed before beginning evaluation. See
for a list of the
required software. The
section of this document contains links to find the software on the TI
website.
Important:
The software must be installed before connecting the ADC08060EVM and TSW1400EVM to
the computer for the first time.
2.1.1
High-Speed Data Converter Pro GUI Installation
The
High-Speed Data Converter Pro
(HSDC Pro) is used to control the TSW1400EVM and analyze the
captured data. See the HSDC Pro user’s guide (
) for more information.
1. Download HSDC Pro from the TI website. The
section of this document contains the link to
find the software on the TI website.
2. Extract the files from the zip file.
3. Run
setup.exe
and follow the installation prompts.
