ON
S1
S0
Hardware Overview
5
SBAU335 – May 2019
Copyright © 2019, Texas Instruments Incorporated
ADCx140EVM-PDK
2.1.1.2
Optical or Auxilary Analog Audio Input
Serial interface signals are provided from the PCM9211 digital transceiver, which is capable of sending
digital data to the EVB from an analog input or optical input. Meanwhile, the data from the EVB can be
streamed through the optical output.
shows the AC-MB audio setting for the optical and analog
mode of operation.
Figure 3. AC-MB Optical or Auxiliary Analog Audio Setting
The optical output of the AC-MB streams the data captured on the EVM with the format determined by the
input source used. When there is an optical input connected, the LOCK LED must be ON, and the
PCM9211 streams the audio serial interface clocks with the format determined by the optical input frame.
The digital data from the optical input is streamed to the evaluation module. If the optical input is not
connected, the PCM9211 captures the input signal provided through the analog input, and streams the
signal to the evaluation module. This feature can be useful when a digital input DAC is connected to the
AC-MB, providing an analog input for quick evaluation. In Auxiliary Analog Audio mode the audio serial
interface format is fixed to a 24-bit, 48-kHz, I
2
S mode.