ADS1115EVM-PDK Kit Operation
space
Step 4.
If the plug-in cannot connect to the EVM, you will see a window as shown in
. This
message may indicate that the firmware is not loaded on the MMB3. You may select Retry
Auto Connect; if that action fails, select Retry Manual Connect and specify the COM port to
be used.
Figure 9. Connection Timeout
Step 5.
The plug-in will detect whether or not the board has the correct firmware loaded. The first
time you use the ADS1115EVM-PDK, the firmware for the MMB3 may need to be
downloaded to the MMB3. If the firmware needs to be loaded, you will see a screen as
shown in
.
Figure 10. Firmware Download Message Box
13
SBAU157B
–
August 2009
–
Revised May 2011
ADS1015EVM, ADS1115EVM, ADS1015EVM-PDK, and ADS1115EVM-PDK
Copyright
©
2009
–
2011, Texas Instruments Incorporated