GND
PWR
IN
ADS58H4x
CLKIN
CH B
J2
J3
J5
J10
J9
J8
J4
USB
DNI
J1
CHA
J7
J6
DNI
JP11
1
JP2
JP3
PDN
1
CHC
J11
J12
DNI
J13
J14
1
JP9
SNRB_EN
JP7
RESET
JP6
JP5
JP1
JP4
1
1
1
1
1
JP12
TRIG
IN
JP8
TRIG
RDY
JP10
HIRES
SW1
RESET
SW2
TRIG
EN
6VDC
D1
USB_PWR
D2
D3
TRIG
RDY
D4
HIRE
S
CHD
DNI
LVDS
LVDS
Introduction
4
SLAU455B – August 2012 – Revised May 2016
Copyright © 2012–2016, Texas Instruments Incorporated
ADS58H4x (ADS58H40/ADS58H43) EVM
1.3
EVM Connectors and Jumpers
Figure 3. ADS58H4x EVM Connector and Jumper Locations
The locations of the connectors, jumpers, pushbutton switches, and LEDs are shown in
. The
EVM has power connectors or banana jacks connecting the main power for power distribution. The SMA
connectors connect the ADC input and ADC clock input to the ADC. Typically, the ADC inputs are
transformer coupled, accepting single-ended connections. The input circuit can be configured to connect
to two SMA connectors for differential signaling.
lists the connector information for the EVM.
Table 2. ADS58H4x EVM Connectors
Reference Designator
Description
J1
6 V (main) power input
J2
6 V (main) power input
J3
Ground return
J4
USB Mini-B connector
J5
SAMTEC high-speed LVDS connector
J6
CH A input (positive)
J7
CH A input (negative) DNI
J8
CH B input (positive)
J9
CH B input (negative) DNI
J10
ADC clock input
J11
CH C input (positive)
J12
CH C input (negative) DNI
