© 2000, 2003 T
EXAS
I
NSTRUMENTS
I
NCORPORATED
G
ETTING
S
TARTED WITH THE
CBL 2™ S
YSTEM
13
Store Latest Run
When you are collecting data with only one sensor, you can store two “active” data
runs on the calculator. This allows you to view and compare data from three runs.
1.
After you collect data, press
·
TOOLS on the DataMate
Main Screen.
DataMate places the data from your first run in List 2 (L2)
of the calculator.
2.
Press
À
STORE LATEST RUN. The Main Screen displays.
The data that you just collected in List 2 is moved to List 3 of the calculator so
that new data can be collected in List 2. You can store up to two runs. (If you
store a second run, the data in List 3 is moved to List 4, the data is List 2 is moved
to List 3, and new data is collected in List 2.)
Graph the Data
1.
If you have multiple sensors attached to the CBL 2™, the
Graph Menu screen displays automatically when you
finish collecting data.
Note: If you have only one sensor attached to the CBL 2, the graph
itself displays.
2.
Press
}
or
h
as needed to move the cursor to the
channel/data you want to view as a graph and
press
Í
.
3.
To view another graph, press
Í
. The Graph Menu screen appears again, and
you can choose another channel.
4.
If you want to change the region of the graph being displayed, go back to the
Graph Menu screen and press
Á
SELECT REGION.
or
If you want to change the graph scale, go back to the screen in which you see
your graph and press
Â
RESCALE. The Rescale Graph screen appears.
or
If you are finished viewing graphs, go back to the Graph Menu screen and press
À
MAIN SCREEN.
