Texas Instruments LP8756 Q1EVM Series User Manual Download

Page: 1 / 42

SNVU472B – October 2016 – Revised August 2018

The LP8756xQ1EVM (SV601325) Evaluation Module

User's Guide

SNVU472B – October 2016 – Revised August 2018

The LP8756xQ1EVM (SV601325) Evaluation Module

This user’s guide describes the operation of the SV601325 revision of the evaluation module for the
LP8756xQ1 multi-phase 4-core step-down converter from Texas Instruments (TI). If the board you have
has BMC031 in the upper-left corner, please reference

The LP8756xQ1EVM (BMC031) Evaluation

Module

document instead. The LP8756xQ1 can be used in five different output configurations, and this

user’s guide includes all these five variants (see

Table 1

). The user’s guide also provides design

information including the schematic and bill of materials (BOM).

Contents

Overview

......................................................................................................................

Quick Setup Guide

...........................................................................................................

2.1

Installing/Opening the Software

..................................................................................

2.2

Power Supply Setup

................................................................................................

2.3

Notes on Efficiency Measurement Procedure

.................................................................

GUI Overview

...............................................................................................................

3.1

Main Tab

...........................................................................................................

3.2

Other Tabs and Menus

...........................................................................................

3.3

Console

.............................................................................................................

Bill of Materials

.............................................................................................................

Board Layout

................................................................................................................

LP8756xQ1EVM Schematics

.............................................................................................

List of Figures

LP8756xQ1EVM

.............................................................................................................

LP8756 Installer License Agreement

......................................................................................

Features of LP8756 Installation

............................................................................................

LP8756 Destination Folder

.................................................................................................

LP8756 Installation Complete

..............................................................................................

Evaluation Software Graphical User Interface (GUI) When Board Connected

......................................

Assert nRST

..................................................................................................................

Read Registers Buttons

.....................................................................................................

BUCK0 Enabled

............................................................................................................

Assert EN1

..................................................................................................................

Accessing Direct Register Write

..........................................................................................

Direct Register Access View

..............................................................................................

Selecting Register Values

.................................................................................................

.....................................................................................................

Config Tab of the LP8756 GUI

...........................................................................................

Advanced Tab of LP8756 GUI

...........................................................................................

Summary of Contents for LP8756 Q1EVM Series











































Search results

Summary of Contents for LP8756 Q1EVM Series

Reviews:

Related manuals for LP8756 Q1EVM Series

Brands by name

Popular brands

Texas Instruments LP8756 Q1EVM Series, User Manual

Search results

Summary of Contents for LP8756 Q1EVM Series

Reviews:

Related manuals for LP8756 Q1EVM Series

Brands by name

Popular brands