TMP006EVM Hardware Setup
1.2
Related Documentation from Texas Instruments
The following documents provide information regarding Texas Instruments' integrated circuits used in the
assembly of the TMP006EVM. This user's guide is available from the TI web site under literature number
SBOU109A. Any letter appended to the literature number corresponds to the document revision that is
current at the time of the writing of this document. Newer revisions may be available from the
or call the Texas Instruments' Literature Response Center at (800) 477-8924 or the Product Information
Center at (972) 644-5580. When ordering, identify the document by both title and literature number.
Related Documentation
Document
Literature Number
TMP006 Product Data Sheet
SM-USB-DIG_Platform User Guide
TMP006 Layout and Assembly
Guidelines
2
TMP006EVM Hardware Setup
shows the system setup for the TMP006EVM. The PC runs graphical user interface (GUI)
software that communicates with the SM-USB-DIG over a USB connection. The SM-USB-DIG translates
the USB commands from the PC into power, I
2
C
™
, SPI
™
, and general-purpose input/output (GPIO)
commands for the TMP006_Test_Board. The TMP006EVM does not require any additional components to
operate.
Figure 2. TMP006EVM Hardware Setup
3
SBOU109A
–
May 2011
–
Revised October 2011
TMP006EVM User Guide and Software Tutorial
Copyright
©
2011, Texas Instruments Incorporated
