TMP006EVM Software Use
5.3
Registers Tab
In this tab, you can select any row in the Register table by clicking on it with your mouse. When a row is
selected, it becomes
highlighted in blue
in the table. The individual 16 bits in the selected register are
displayed below the Register table. Note that each bit has descriptive text above the bit that identifies the
function of the bit. You can edit the bit value using the up (
↑
) or down (
↓
) arrow to the left of the bit. Any
changes on the bit are displayed in the table and in the block diagram. Additionally, any changes in the
block diagram are reflected in the table.
The Help w Reg button can be pressed to see detailed help about the register that is currently selected.
This feature gives detailed information regarding the meaning of each bit. The Registers tab on the
TMP006EVM GUI software is illustrated in
Figure 15. TMP006EVM GUI Software Registers Tab
15
SBOU109A
–
May 2011
–
Revised October 2011
TMP006EVM User Guide and Software Tutorial
Copyright
©
2011, Texas Instruments Incorporated
