Operation
7
Operation
This section describes how to operate the TPA6166A2EVM.
7.1
Summary of Operation Instructions
Follow the procedures below to quickly set up the TPA6166A2EVM and begin evaluation (upon
connecting to the USB):
1. Install the GUI. Use a PC running Microsoft
®
Windows
®
XP or higher. See
for details.
2. Connect the EVM to the PC and power up the EVM. Use a micro-USB cable. See
for
details.
3. Run the GUI.
4. Connect inputs and outputs. See
for details.
5. Plug in a supported accessory. See
for details.
6. Use the GUI to control the evaluation. See
for details.
7.2
Install and Run the Graphical User Interface
Download the PurePath™ Console from
. Once the PurePath Console is installed, select the
TPA6166A2 plugin to start the GUI. The front panel of the GUI looks like
. Refer to
for
a detailed description of the GUI. Connect the EVM before running the GUI.
Figure 3. PurePath Console
5
SLOU381 – March 2014
TPA6166A2 Multimedia Headset Interface
Copyright © 2014, Texas Instruments Incorporated