Device Evaluation Options
7.5
Plug In a Supported Accessory
Connect a supported accessory to the 3.5-mm jack J1. For a list of supported accessories, refer to the
TPA6166A2 data sheet (
) under
Accessory detection
. As soon as the accessory is inserted, the
GUI should indicate the type of accessory inserted.
7.6
PurePath Console GUI Evaluation
Use the PurePath Console GUI to control the device during evaluation. This section gives a short
description of the main features of the GUI.
The GUI window consists of the following tabs:
EVM
,
Block Diagram
,
TPA6166A2
,
Direct I2C Read/Write
,
Registers
, and
Scripting
.
Figure 5. TPA6166A2 Panel Details
8
Device Evaluation Options
8.1
Current Measurement Connections
One or both of the jumpers JP2 and JP3 can be removed and current meters can be installed to measure
TPA6166A2 current consumption
8
TPA6166A2 Multimedia Headset Interface
SLOU381 – March 2014
Copyright © 2014, Texas Instruments Incorporated