manualshive.com logo in svg

Texas Instruments TravelMate 2000, User Manual

The Acer TravelMate 2000 user manual can be easily downloaded for free from 88.208.23.73:8080. This comprehensive manual, titled "(French) Manuel D'utilisation", provides step-by-step instructions and valuable insights on operating and troubleshooting your TravelMate 2000. Enhance your user experience by accessing this essential manual and get started in no time.

Share
Download
background image

Index

f
files

AUTOEXEC.BAT .............................. 5-7
CONFIG.SYS ..................................... 5-7

firmware ................................................... 1-5
floppy disk............................................. ...6-6
Floppy Disk indicator............................. 2-19
floppy drive ................................ 1-6,1-7,2-9,

.................................................... 6-5, A-4

Fn (Function) key.................................... 2-15
front panel............................................... 2-12
function keys........................................... 2-16
functions

display timeout.................................. 4-11
hard disk drive timeout ..................... 4-11
power saving .................................... 4-10
system timeout................................... 4-11

g
graphics mode......................................... 4-16
guidelines, installing applications ... 5-3
GW-BASIC ............................................ 1-10

h
hard disk ................................ 1-6, 1-11, 2-20

backing up......................................... 4-26
cylinders ........................................... 1-11
failure ............................................... 1-12
formatting.......................................... 1-11
platter................................................ 1-11
sector number.................................... 1-11
sectors............................................... 1-11
tracks ................................................ 1-11

hard disk drive.......................... 1-4, A-2, E-7

timeout function................................. 4-11

Hard Disk indicator ................................ 2-20
hardware, configuring......................1-4, 4-18
hardware installation ...................... 4-18, A-7

display configuration ........................ 4-21
screen.........................................2-3, 4-18

hardware options ...................................... 1-7
HDD ......................................................... 1-6
Hercules Graphics Card ............................J-5
HGC ................................................ 4-21, J-5
high-memory area .................................... H-8

HIMEM.SYS

device driver ..................... H-3, H-5, H-8

humidity specifications.............................A-2

i
I/0 (input/output)

configuration..................................... 4-21
port ............................................. 1-4,1-10
serial................................................. 4-13
system............................................... 1-10

indicators....................................... 2-12, 2-19

Caps Lock................................ 2-14, 2-20
Charge .............................................. 2-19
Floppy Disk ...................................... 2-19
Hard Disk ......................................... 2-20
Low Batt(ery) ................................... 2-19
Num  Lock ............................... 2-17, 2-20
Power ............................................... 2-19
Scr Lk (scroll lock) .......................... 2-20

initial program loader............................... 1-5
Ins(ert) key ............................................. 2-16
installation, hardware..................... 4-18, A-7
installing

application programs .......................... 5-3
applications without drive option ....... 5-3
applications,
considerations when ........................... 5-5
copy-protected programs .................... 5-4
device drivers.....................................H-6
internal battery.................................... 3-3
programs not copy-protected .............. 5-4
programs with floppy drive ................ 5-5

integrated circuits ..................................... 1-4
internal battery..........................2-11, 3-3, 3-7

charging .............................................. 3-7
installing ............................................. 3-3
removing............................................. 3-5

internal display adaptor.......................... 4-15
internal memory............................... H-1, H-5
internal memory check.............................. 4-4
internal memory size............................... 4-23
Internal Modem option .................... 1-7, 6-19
internal parallel port............................... 4-22
internal RAM.................................. A- 1, A-3
internal serial port .................................. 4-21

Index 3

Summary of Contents for TravelMate 2000

















































































































































































































Reviews:

No comments

Related manuals for TravelMate 2000

Acer 4315 2004 - Aspire Manuel D'Utilisation preview
4315 2004 - Aspire
Brand: Acer Pages: 114
Acer 3100 1868 - Aspire Guía Del Usuario preview
3100 1868 - Aspire
Brand: Acer Pages: 113
Acer 1410 2039 - Aspire Manuel D'Utilisation preview
1410 2039 - Aspire
Brand: Acer Pages: 104
Acer 4315 2004 - Aspire Guía Del Usuario preview
4315 2004 - Aspire
Brand: Acer Pages: 111
Acer 4200 4091 - TravelMate - Core Duo 1.66 GHz Manual Do Utilizador preview
4200 4091 - TravelMate - Core Duo 1.66 GHz
Brand: Acer Pages: 110
Acer 5050 4697 - Aspire Manuel D'Utilisation preview
5050 4697 - Aspire
Brand: Acer Pages: 120
Acer 5050 4697 - Aspire Guía Del Usuario preview
5050 4697 - Aspire
Brand: Acer Pages: 122
Acer 4200 4091 - TravelMate - Core Duo 1.66 GHz Guía Del Usuario preview
4200 4091 - TravelMate - Core Duo 1.66 GHz
Brand: Acer Pages: 81
Acer 4200 4091 - TravelMate - Core Duo 1.66 GHz Manuel D'Utilisation preview
4200 4091 - TravelMate - Core Duo 1.66 GHz
Brand: Acer Pages: 109
Acer 3100 1868 - Aspire Manual Do Utilizador preview
3100 1868 - Aspire
Brand: Acer Pages: 114
Acer 3100 1868 - Aspire Manuel D'Utilisation preview
3100 1868 - Aspire
Brand: Acer Pages: 116
Acer 2480 2779 - TravelMate Manuel D'Utilisation preview
2480 2779 - TravelMate
Brand: Acer Pages: 95
Acer 2450 Manual Do Usuário preview
2450
Brand: Acer Pages: 89
Acer 5610 4179 - Aspire Guía Del Usuario preview
5610 4179 - Aspire
Brand: Acer Pages: 98
Acer 5050 4697 - Aspire Manual Do Utilizador preview
5050 4697 - Aspire
Brand: Acer Pages: 120
Acer A515-47 User Manual preview
A515-47
Brand: Acer Pages: 77
Ace ASPIRE S7-191 Quick Manual preview
ASPIRE S7-191
Brand: Ace Pages: 366
NCS Cirrus LT Plus User Manual preview
Cirrus LT Plus
Brand: NCS Pages: 160

Brands by name

Popular brands

Load more brands