Texas Instruments Voyage 200 User Manual Download

Page: 651 / 1008

Text Editor

651

Deleting Characters

Note:

If there are no characters to the right of the cursor,

erases the entire

paragraph.

Highlighting Text

To delete:

Press:

The character to the left of the cursor

The character to the right of the cursor

(same as

¥ 0

)

All characters to the right of the cursor
through the end of the paragraph

All characters in the paragraph (regardless
of the cursor’s position in that paragraph)

To:

Do this:

Highlight text

Move the cursor to the beginning or end of the text.
Hold

and press:

•

to highlight characters to the left or right of the

cursor, respectively.

•

to highlight all characters up to the cursor

position on the next or previous line, respectively.

Summary of Contents for Voyage 200

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Voyage 200

Reviews:

Related manuals for Voyage 200

Brands by name

Popular brands

Texas Instruments Voyage 200, User Manual

Search results

Summary of Contents for Voyage 200

Reviews:

Related manuals for Voyage 200

Brands by name

Popular brands