5.14.3
Adding an Access Policy to a Logical Unit
To make Logical Units accessible to connected servers, the next step is to link the Logical Unit to
the RamSan-810’s Fibre Channel and/or InfiniBand ports.
Click the “
Access
” button on the “
Logical Unit Overview
” screen to start the access policy
wizard.
The first step of the access policy wizard will provide an overview of the process. After reading
the overview, click the “
Next
” button to continue to the “
Modify Access Policies
” screen,
shown in Figure 16.
Figure 16: Web Monitor Access Policies Wizard
The left-hand tree titled “
Available
” shows a tree of all controller ports in the system with each
port’s available access policies underneath. The right-hand tree titled “
Assigned
” shows the
policies currently in-use for each port in the system. If there are potential conflicts between
policies assigned and policies available, the conflicting available policies will be disabled in the
“
Available
” tree (see Figure 35 for an example).
RamSan-810 User’s Manual
- 34 -
Texas Memory Systems, Inc.