6
Troubleshooting:
The motor will not start
1. Check the fuel control is set correctly.
2. Check the spark plug.
3. Check there is fresh gas in the tank.
4. See separate motor instructions for further
troubleshooting.
The motor is not running smoothly
1. Ensure the throttle control is not set to max.
2. Check there is fresh gas in the tank.
The blades will not rotate
1. Check for stones lodged between the blades.
2. Release any stones by removing the blades.
3. Check the cables are in good working order and
fitted correctly.
4. Check the belt is in good working order and
fitted correctly.
5. Ensure the belt tensioner is adjusted correctly.
The blades will not stop
1. Stop the engine and contact your dealer.
Specifications
Model
HMH 5500S
Length (mm)
1210
Width (mm)
550
Height (mm)
1020
Weight dry (kg)
52,5
Rotation speed, knives (rpm)
160
Working width (mm)
36-55-85
Steer
Fast
Gear forward
1
Gear reverse
1
Working depth (cm)
33