Maintance
Before any service and maintenance is done, the power must be disconnected. This
means that the battery must be dismounted.
Change the line like this:
Push on each side of the trimmerhead.
The top cover will eject.
Take the inner spool out and replace it with a
new one. Press the line through the holes on the
top cover.
Mount the cover with spool carefully. Be sure
the spring is mounted correctly.
Extra spools can be bought at your dealer.
The battery must be stored in a warm place during winter. Charge the battery a few times in the
storage period.
If you have any doubts, contact your dealer.
Specifications
Model
GTA 18 / AT 18
Battery
18 Volt Ni-Mh
RPM
12.000 without load
Working time
App. 20 min.
Charging time
5 hrs
Cutting width
26 cm
Trimmerhead
Tap ’n Go - 1,2 mm
19
Summary of Contents for AT 18
Page 29: ...29 ...