10
Connection
The trimmer may only be connected to single-phase AC current 230 Volt 50 Hz. It has
protective insulation and may therefore be connected to the socket without a protective
conductor. Before use make sure that the mains voltage is the same as the operation
voltage indicated on the rating plate of the trimmer.
Clothing
When using the machine, wear tight-fitting work
clothes, strong working gloves, hearing protectors and
boots with non-skid soles.
Operation
To start the trimmer, activate the
on/off switch (1).
Stop the trimmer by releasing the
of/off switch.
Allow at least 5 seconds for the spool
to stop rotating.
Always hold both handles, when
using the trimmer.
The nylon line is being released
automatically while operating the
trimmer.
Lift the trimmerhead up, give it max
speed, then the nylon will more easily
be released from the spool.
If no line is released, check if the line
is jammed or the spool is empty.
If the line becomes too long, the small
blade on the protection guard will cut
of the extra line.
2
1
