13
Warning:
If ejection chute becomes clogged or cutting blades become jammed, you should under no
circumstances place your hands in ejection chute to try to clear obstruction, as this will lead to
serious injury.
Warning:
Before lifting the top hopper to gain access (e.g. to clear a blockage) ensure that the machine is
switched off and that the supply cord is disconnected. Wait until the machine has come to a
complete stop before releasing the locking knob.
Your shredder has been designed for a low level of maintenance, involving routine cleaning and
inspection. The motor of the shredder is maintenance free and requires no attention. For the best
results the blade must be kept sharp at all times. The blade have dramatically less cutting power
when blunt. The shredder will tear rather than cut when the blade are blunt. When this occurs
sharpen or replace the blade immediately.
Important:
Before attempting any maintenance switch the machine off and disconnect the power cord.
Maintenance
BLADE MAINTENANCE
1. Open the front cover (figure 7)
2. Clean around the blade
3. Spray with acid-free spray for example WD40.
4. Mount the front cover.
CLEANING
Brush loose debris from the inside and wipe clean the outer surfaces with a damp cloth. Do not use
a water hose.
Specifications
KV2500 Shredder
•
Rated voltage:
220~240 V / 50 Hz
•
Power:
2500 W (16 amp.)
•
Max cutting size:
Ø 42 mm
•
Collector box:
60 L
•
Weight:
21
kg.
NOISE AND VIBRATION DATA
A weighted sound pressure level:
78 dB(A), K=3
A weighted sound power level:
97 dB(A), K=3
*
The sound intensity level for operator may exceed
85 dB(A) and ear protection measures are necessary.
Environment protection
Waste electrical products must
not be disposed of with the
household waste.
This tool should be taken to your
local recycling centre for safe
treatment.
Summary of Contents for KV2500
Page 2: ...2 1 2 ...
Page 3: ...3 3 4 5 6 ...
