www.texas.dk
22
Use the same technique as described above but lean further into the turn. This prevents the vehicle from
tilting. If your ATV starts to tilt you should lean your body weight even further into the turn while gradually
reducing the turn, gradually reduces the speed and if possible making the turn wider.
It may be hazardous to turn in the wrong way as this may lead to collision or tilting.
Always follow the proper procedures for turning as described in this manual. Practise turning at low speed
before applying more speed. Never turn at high speed.
6. Chains
The condition and adjustment of the chains should be checked every time the ATV is to be used.
Failure to inspect the chain before use can be hazardous.
Riding with the chain in poor condition may lead to accidents.
Be sure to inspect and maintain the chain before each ride, according to the guidelines. See 7. Maintenance.
7. Forward / reverse
The ATV is equipped with a forward and reverse gear placed on the middle console.
Gear
The ATV has two speeds. You change speed by pressing the button placed
below the left front wing.
8. Maintenance
8.1.Inspection of the chain
Check the chain for:
When the upper part of the
button is pressed, the ATV
goes forward.
If the lower part of the
button is pressed the ATV
goes backwards.
Summary of Contents for Off-Roader 36EL
Page 26: ...www texas dk 26 12 Electric diagram ...
Page 27: ...www texas dk 27 ...