Premier Elite Com GSM Module Installation Manual
INS315-4
11
Premier 412/816/816 Plus/832
Alarm Reporting and Upload/Download via IP
IP Mode (panel port programmed as Com IP, fixed IP SIM card)
1.
Enter “Engineers Programming” mode and select “Communicator Options”, then select “Download
Options 76”. Ensure Com Port Option 5 is programmed as “ComIP” option 3.
2.
Leave the following blank Local IP address, Local IP Port & Gateway
3.
Now select the “Communicator Options” menu and “Enable Communicator”
4.
Now select “ARC’s” and ensure the following options are programmed for one of the ARC options:
a)
Protocol : Program as required.
b)
Report for : Program as required
c)
Account Numbers : Program as required.
d)
Reporting Options : Program as required.
e)
Protocol Options : Program as required.
f)
For Upload/Download via Wintex edit the Account/Panel Details and fill in the IP address and Port
number you have been given.
All three status LED’s should now be on, if status LED 3 is off or flashing, this indicates a low GSM signal level. If
the signal level is low, try moving the antenna to improve the reception.
Specifications
Electrical
Supply:
9 to 14VDC
Current Consumption:
35mA quiescent; 100mA when active
Environmental
Operating Temperature:
-10
°
C to +55
°
C
Maximum Humidity:
95% non-condensing
Physical
Dimensions:
145mm x 90mm x 30mm
Packed Weight:
200g (approx.)
Standards
2004/108/EC (CE directive): Hereby, Texecom declares that this device is in compliance with the essential requirements and other
relevant provisions of Directive 2004/108/EC.
Weee Directive: 2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal
waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.
RoHs Directive: 2002/95/EC RoHS Compliant. Hereby, Texecom declares that this device does not contain lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls (PBB) or polybrominated depheny ethers (PBDE) in more than the percentage specified by EU directive
2002/95/EC, except exemptions stated in EU directive 2002/95/EC annex.
This product is a Type B Moveable device and is suitable for use in systems designed to comply with EN 50131-1, EN50131-3 and PD6662 at Grade 3 and
Environmental Class II. ATS Class 3
Warranty
All Texecom products are designed for reliable, trouble-free operation. Quality is carefully monitored by extensive computerised testing. As a result the
Premier
Elite ComGSM
module is covered by a two-year warranty against defects in material or workmanship. As the
Premier Elite ComGSM
module is not a
complete alarm system but only a part thereof, Texecom cannot accept responsibility or liability for any damages whatsoever based on a claim that the
Premier Elite ComGSM
module failed to function correctly. Due to our policy of continuous improvement Texecom reserve the right to change specification
without prior notice.
Premier
is a trademark of Texecom Ltd.
