Texi Fox 25 User Manual Download

Page: 187 / 200

НАЧАЛО И ЗАВЕРШЕНИЕ ШВА

СМЕНА НАПРАВЛЕНИЯ ШИТ

ВНИМАНИЕ: Во время шитья следует обращать

внимание на пространство около иглы.

Машина автоматически продвигает материал, не

тяните и не подталкивайте материал.

Установите иглу в наивысшей позиции.

Поднимите лапку и разместите под ней ткань.

Опустите лапку.

Отведите игольную и шпульную нити назад.

Сделайте несколько стежков.

Отрегулируйте скорость шитья.

Остановите машину, когда закончите шов.

Поднимите прижимную лапку.

С помощью махового колеса поднимите

иглу вверх и от себя вытяните материал из-

под лапки. Обрежьте нитку при помощи

нитеобрезателя с боку машины.

Остановите машину за несколько

стежков перед сменой

направления шитья.

Установите иглу в нижней позиции

(нажав кнопку позиции иглы либо

поворачивая маховик).

Поднимите прижимную лапку.

Поверните ткань вокруг иглы и

смените направление шитья.

Опустите прижимную лапку и

продолжайте шить.

UTILITY STITCHES

Straight stitch

Raise the presser foot and position the fabric next to a
stitching guide line on the needle plate.

Lower the needle into the fabric.

Lower the presser foot and smooth the thread towards the
back. Depress the foot control.

Gently guide the fabric along the guide line letting the
fabric feed by itself.

For fastening the ends of seams, press the reverse stitch
button and sew several reverse stitches.

Raise the presser foot and remove the fabric, drawing the
threads to back.

The threads are cut the proper length for starting the next
seam.

2~6

1.5~4

Machine

Setting

KNOWING

YOUR

SEWING

MACHINE

Useful sewing tips

Various ways to achieve better sewing results are described below.
Refer to these tips when sewing.

1. Trial sewing

Use different stitch width and length for trial sewing. When you have finished, select the

best looking stitch width and length for correct sewing.

For the trial sewing, use a piece of fabric and thread that are the same as those used for

your project, and check the thread tension and stitch length and width. Since the results
differ depending on the type of stitching and the number of fabric layers sewn, perform the
trial sewing under the same conditions that will be used with your project.

3. Sewing curves

1).Stop sewing, and then slightly change the sewing direction to sew around the curve.
2).When sewing along a curve while using a zigzag stitch, select a shorter length in order to

obtain a finer stitch.

4. Sewing thick fabrics

If the fabric does not fit under the presser foot

Raise the presser foot even higher to bring the presser foot to its highest position. Then feed
the fabric under the presser foot. (See page 4 to Raise the presser foot.)

5. Sewing elastic fabric or the fabric that is easy to cause skipping stitches

Use round head needle and bigger stitch length. If necessary, add one layer of lining cloth

under the fabric for better sewing.

6. Sewing thin fabric or silk

When sewing thin fabric or silk, the stitch may depart from correct direction or cannot feed the

fabric correctly. If so, add one layer of lining cloth under the fabric for better sewing.

7. Sewing stretch fabrics

First, baste the piece of fabric together, and then sew without stretching the fabric.

8. Free arm sewing

When sewing tube fabric or the part cannot reach, use the free arm sewing function (For

detail, refer to page 4).

2. Changing the sewing direction

Stop the machine and turn the hand wheel
toward you to bring the needle down into the
fabric. Raise the presser foot.
Pivot the fabric around the needle to change
sewing direction as desired. Lower the

presser foot and continue sewing.

Texi Fox 25

187