No.
Items
Range
Default
Description
P15
Mending stitch mode
0-4
2
0: half stitch
1: one stitch
2: continuous half stitch
3: continuous one stitch
4: Back-tacking when machine stop or pause
P21
The position of the pedal for
accelerating
30-1000
520
P22
The position of the pedal for the
stop
30-1000
420
P24
The position of the pedal for
thread trimming
30-1000
130
P27-N6
Auto count selection
0-50
1
0: P41 item trimming counter not count automatically.
1-50: Counter trimming times
P27-N12
Boot display counter interface
selection
0-1
0
0: OFF
1: ON
P27-N13
Thread trimming counter mode
selection
0-1
0
0: Additive sewing counter
1: Subtractive sewing counter
P29
The
strength of thread trimming
stop
1-45
32
P38
Automatic thread trimming
function selection
ON/OFF
ON
P41
Counter display
0-9999
0
Display the quantity of finished sewing piece.
Long-press “-”
key to clear the count
P42-N01
The control system version
number
P42-N02
The panel version number
P42-N03
Speed
P42-N04
The pedal AD
P42-N05
The mechanical angle(up
position)
P42-N06
The mechanical angle(down
position)
P42-N07
Busbar voltage AD
P43
Direction of motor rotation
CCW/CW
CCW
CW: Clockwise
CCW: Counterclockwise
P44
Brake strength during stopover
1-45
30
P46
Motor stop with a reverse angle
after trimming function
ON/OFF
OFF
P47
Adjust the reverse angle when
motor stop after trimming
50-200
160
After thread trimming, start from the upper needle position and
adjust the angle of the needle lift in reverse operation.
P48
The minimum speed
(positioning speed) (rpm)
100-500
210
Adjust the minimum speed
P49
Thread trimming speed (rpm)
100-500
300
Adjust the motor speed during the thread trimming cycle
P54
Thread trimming action time
(ms)
10-990
200
P56
Power on and positioning
0-2
0
0: Always not to find the up needle position
1: Always to find the up needle position
2: If the motor is not into the up needle position, it will find the