③
Press
or
for 2-3 seconds
，
the set screws at the X+
direction will rotate to X- direction.
④
Tighten the set screws.
⑤
Press the number in
，
it will be 0
，
the creasing wheel
tool installation is finished.
(3)The falling position of creasing wheel is the same as the setting
method of knife depth, but the specific position is subject to the
actual folding effect.
(4)
→
→
→
，
Choose
the processing method according to the actual situation.
，
It represents the distance that the creasing wheel continues to fall
on the basis of the set knife depth.For example, the current knife
depth of the creasing wheel tool is 30, the
“
heavy add
”
is 1,and
，
the actual knife depth of the creasing wheel tool will be
31mm during processing the material in X direction.
7.8 V-cut Tool
(Note: The V-cut knife is divided into two sizes, one is the big knife
which cannot cut arc and another one is a small knife which can cut
arc. And some setting need to be changed before using, as shown below:
A.The big knife
，
→
→
，
B.The small knife
→
→
，
)
(1)Big knife V-cut tool(SP3,Vcut,Head2)
①
Install of the knife
Summary of Contents for XYZ 2518
Page 1: ...TEXI XYZ 2518 MANUAL...
