55
Figure 4-13
Remote Interface Operation
You can also use the remote interface operations from your PC terminal to set the trigger
delay. To select a delay time, use the following command or set the trigger delay to be
automatic:
TRIGger:DELay {<seconds>|MINimum|MAXimum}
or
TRIGger:DELay:AUTO {OFF|ON}
3.3 Math Operations
This section will introduce the mathematical operations in DL-2060. There are eight
math operations: RITIO, %, Min/Max, NULL, Limits, MX+B, dB and dBm testing. They
either store data for later use or perform mathematical operations on the readings. Note
that these math operations are available to all measurement functions except continuity
and diode testing.
※
Note: The “MATH” anunnciator on the display indicates the state of a mathematical
feature, excluding Ratio, and will be lit by enabling whichever math feature. Also, press
the same buttons again for the enabled math feature will disable the same math feature.
※
Note: Press RATIO button, the “RATIO” anunnciator will be lit on the display.
Summary of Contents for DL-2060
Page 37: ...31 Figure 3 17 1 2 3 5 5 4...
Page 136: ...130...
Page 137: ...131...
Page 138: ...132 D DL 2060 s Dimension...
