184
8-15-8. SOURce[1|2]:BURSt:TRIGger:DELay
Set
Query
Description
The DELay command is used to insert a delay (in seconds)
before a burst is output. The delay starts after a trigger is
received. The default delay is 0 seconds.
Syntax
SOURce[1|2]: BURSt:TRIGger:DELay
{<seconds>|MINimum|MAXimum}
Parameter
<seconds>
0~655350 nS
Example
SOUR1:BURS:TRIG:DEL +1.0000E+01
Sets the trigger delay to 10 seconds.
Query Syntax
SOURce[1|2]:BURSt:TRIGger:DELay?
[MINimum|MAXimum]
Return Parameter <NRf>
Delay in seconds
Example
SOUR1:BURS:TRIG:DEL ?
+1.0000E+01
The trigger delay is 10 seconds.
8-15-9. SOURce[1|2]:BURSt:TRIGger:SLOPe
Set
Query
Description
Sets or queries the trigger edge for externally triggered bursts
from the Trigger INPUT terminal on the rear panel. By default
the trigger is rising edge (Positive).
Syntax
SOURce[1|2]:BURSt:TRIGger:SLOPe
{POSitive|NEGative}
Parameter
POSitive
rising edge
NEGative
falling edge
Example
SOUR1:BURS:TRIG:SLOP NEG
Sets the trigger slope to negative.
Query Syntax
SOURce[1|2]:BURSt:TRIGger:SLOPe?
Return Parameter POS
rising edge
NEG
falling edge
Summary of Contents for FGX-2220
Page 1: ...B71 0406 01 INSTRUCTION MANUAL ARBITRARY FUNCTION GENERATOR FGX 2220...
Page 98: ...85...
Page 137: ...124...
Page 227: ...214 9 2 External Dimensions Figure...
