68
4-6-1. Selecting Sweep Mode
The Sweep button is used to output a sweep. If no
settings have been configured, the default settings for
output amplitude, offset and frequency are used.
Sweep
4-6-2. Setting Start and Stop Frequency
The start and stop frequencies define the upper and lower sweep limits. The
function generator will sweep from the start through to the stop frequency and cycle
back to the start frequency. The sweep is phase continuous over the full range
sweep
range (1μHz-25MHz).
Panel Operation
1.
Press the SWEEP key.
Sweep
2.
Press F3 (Start) or F4 (Stop) to
selelect the start or stop
frequency.
Start
F3
~
Stop
F4
3.
The Start or Stop parameter will become highlighted
in the waveform display area.
Start
Stop
4.
Use the arrow keys and scroll
wheel or number pad to enter the
Stop/Start frequency.
0
/
3
2
1
4
7
8
5
9
6
Summary of Contents for FGX-2220
Page 1: ...B71 0406 01 INSTRUCTION MANUAL ARBITRARY FUNCTION GENERATOR FGX 2220...
Page 98: ...85...
Page 137: ...124...
Page 227: ...214 9 2 External Dimensions Figure...
