164
Query Syntax
SOURce[1|2]:PM:STATe?
Return Parameter 0
Disabled (OFF)
1
Enabled (ON)
Example
SOUR1:PM:STAT?
1
PM modulation is currently enabled.
8-12-3. SOURce[1|2]:PM:SOURce
Set
Query
Description
Sets or queries the PM source as internal or external. Internal
is the default source.
Note
If an external PM source is selected, the phase modulation is
controlled by the MOD INPUT terminal on the rear panel.
Syntax
SOURce[1|2]:PM:SOURce {INTernal|EXTernal}
Example
SOUR1:PM:SOUR EXT
Sets the PM source to external.
Query Syntax
SOURce[1|2]:PM:SOURce?
Return Parameter INT
Internal
EXT
External
Example
SOUR1:PM:SOUR?
INT
The PM source is set to internal.
8-12-4. SOURce[1|2]:PM:INTernal:FUNction
Set
Query
Description
Sets the shape of the modulating waveform from sine,
square, triangle, upramp and dnramp. The default shape is
sine.
Note
Square and triangle waveforms have a 50% duty cycle.
Upramp and dnramp have a symmetry to 100% and 0%,
respectively. .
Syntax
SOURce[1|2]:PM:INTernal:FUNction
{SINusoid|SQUare|TRIangle|UPRamp|DNRamp}
Summary of Contents for FGX-2220
Page 1: ...B71 0406 01 INSTRUCTION MANUAL ARBITRARY FUNCTION GENERATOR FGX 2220...
Page 98: ...85...
Page 137: ...124...
Page 227: ...214 9 2 External Dimensions Figure...
