II
USING THE PRODUCT SAFELY
WARNING
■
Do not remove the product's covers and panels
Never remove the product's covers and panels for any purpose.
Otherwise, the user's electric shock or a fire may be incurred.
■
Warning on using the product
The warning items given below are to avoid danger to the user's body and life and avoid the
damage and deterioration of the product.
Use the product, observing the following warning and caution items.
■
Warning about Input Power
- Be sure to use the product within the source voltage rating marked on the product. Disobedience
to this warning may result in a fire. The rated source voltage of this product is AV 100V to 240V
(voltage fluctuation: within
±
10%), single-phase. (AC250V max.)
-Use the AC power cable supplied with the product. Using another power cable may result in electric
shocks, electrocution or a fire. If the supplied AC power cable is damaged, stop using it and
contact your dealer or our distributor. Using the product with the damaged AC power cable may
result in electric shocks, electrocution or a fire.
-The product will not run if the input protection fuse has blown. The protection fuse is built in the
product and cannot be replaced by the user. If it has blown, contact your dealer or our distributor
without opening the case. Our serviceman will replace it. The user must not attempt to replace the
fuse at his/her discretion. Disobedience to this warning may result in electric shocks, electrocution
or a fire. IF 100V or 120V is to be changed into 220V or 230V, power cord need to be changed.
■
About Grounding
- Be sure to connect the ground wire of the three-wire power cable supplied with the product (or the
ground terminal of the three-pole plug of the cable) to the earth. The chassis of the product is
grounded to the GND.
■
Warning about Installation Conditions
- Use the product in the operation temperature range shown in the manual. Do not use the product
with the vent holes blocked or in a high ambient temperature. Disobedience to this warning may
result in a fire.
- Use the product in the operation humidity range shown in the manual. When moving it to a room at
different humidity, pay attention to dew condensation due to rapid humidity change. Do not handle
the product with wet hands. Disobedience to this warning may result in electric shocks,
electrocution or a fire.
- Do not use the product in or around a place where combustible gas, explosive gas or vapor is
produced or stored. Disobedience to this warning may result in explosion or a fire. Do not use the
product in or around a place where corrosive gas is produced or accumulated. Disobedience to this
warning may result in serious damages to the product.
- Do not put metallic or combustible objects or pour water into the product through the vent holes,
etc. Disobedience to this warning may result in electric shocks, electrocution or a fire.
■
Warning about Errors in Operation
- If the product products smoke, fire or odor in operation, stop using the product, turn it off, and
disconnect the AC power cable from the AC outlet. Make sure that the fire hasn’t spread to other
equipment, then contact your dealer or our distributor.
