When being used with keypads, the
RX 800
can receive IR signals from each
zone, and routed back through the Cat5e/6 and Keypad up to the Amplifier to
control the selected source. For example, if Source 2-DVD is selected in Zone 1,
the user will be able to control the DVD player to power the device on/off,
change settings ect. Since the amplifer has discreet routing, ONLY the Source
that is selected on each zone can be controlled. This prevents other sources
from accidently be controlled when selected on other zones.
The RX 800 can allow 6 sources to be distributed to up to 12 zones on 3
different units using the provided ribbon cable to connect between units. To do
this first each unit needs to be addressed according using the MASTER/SLAVE
switch. There are 3 positions for this, Master, Slave 1, and Slave 2 which help
identify each unit.
13
Source 2-DVD
IR Emitter from
Source 2 port
Power
IR Signal
Grounding
IR +
IR -
Summary of Contents for RX 800
Page 2: ...2 ...
Page 7: ...7 1 7 2 5 6 3 4 3 ...
Page 8: ...8 RX 800 RX 800 RCA 3 5mm Stereo ...
Page 12: ...12 four 4 ...