Quick Start Guide R-UHF-R700 reader reader
UM001913
Page 3 / 4
Rev. 1.0 – 2 Jun 2022
E.
Install Cloudburst software to start operating the reader
Cloudburst is a Datamars software that allows to manage the RFID reader and it allows to quickly deploy the
RFID system with no need for software development and deep RFID knowledge.
1.
Download Cloudburst clicking the Download button at the following address
https://www.textile-
id.com/cloudburst
and unzip the downloaded file.
2.
Connect to the reader management interface using a Web browser (e.g. Google Chrome), type
http://169.254.1.1
address in the address bar and press enter. Login with the default credentials. User
name: root. Password: impinj.
3.
Click the Browse… button in the Reader upgrade section. Select the .upg file (e.g.
Cloudburst_1_0_0.upgx) in the unzipped folder of the previously downloaded file and click Open.
4.
Click on the Upgrade [
] button. The reader uploads Cloudburst and then commits the SW image, the
process lasts about 30 seconds. When the Last Operation Status turns to Waiting for manual reboot click
on the Reboot
button in the Reader Reboot section. The installation and reboot process take about
60 seconds. If the software is successfully installed the System LED is solid blue and the Inventory LED
blinks blue.
F.
Start operating the reader with Cloudburst
1.
Connect an antenna to the ANT1 connector on the RFID reader and put an RFID tag on the antenna.
2.
Connect to the Cloudburst Web GUI using a Web browser (e.g. Google Chrome), type
https://169.254.1.1
address in the address bar and press enter. Type the default password: password
and click the Login button.