15
INTRODUCTION
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
INTRODUCTION
FEATURES
General Information
If the vehicle is equipped with factory installed custom accessories, some accessories remain operational with the
key switch in the ‘OFF’ position.
ALL accessories that do NOT use the accessory wiring harness or DC to DC converter MUST be connected
to draw from the entire battery pack; 36V or 48V depending on the vehicle model.
Accessories that do not use the accessory harness must
be connected to the DC to DC converter.
1. Key Switch
Located on the dash panel, this switch enables the
basic electrical system of the vehicle to be turned on
and off by turning the key. To prevent inadvertent
operation of the vehicle when left unattended, the
key should be turned to the OFF position and
removed.
2. Light Switch (if equipped)
The lights are operated by turning the key switch to
the “lights” position.
3. State of Charge Meter
The vehicle is equipped with a state of charge meter
located in the dash panel. The state of charge meter
indicates the amount of usable power in the batter-
ies, with ‘F’ indicating a full charge on the battery
pack and ‘E’ indicating the battery pack needs to be
charged.
4. Direction Selector
Located on the dash panel, this switch permits the
selection of either ‘F’ (forward), ‘R’ (reverse) or ‘N’
(neutral). When left unattended, the vehicle should
be placed in neutral, the parking brake engaged,
and the key removed.
When moved to the “R” position, a reverse warning
buzzer will sound.
5. Hour Meter
Located in the dash panel, the hour meter indicates the total hours of operation.
6. Horn
The horn is operated by pushing the horn button located in the dash panel.
NOTICE
4
3
5
6
2
OFF
ON
1
Summary of Contents for E-Z-GO Cushman TITAN 36V HD
Page 1: ...Owner s Guide Titan LD HD Electric 635592 B Issued NOVEMBER 2013 Revised JULY 2018...
Page 57: ......
Page 58: ......