31
MAINTENANCE
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
FUSE REPLACEMENT
To replace fuses, remove two phillips head screws that
secure the access panel to the dash, swing panel down-
ward to expose the fuse block.
TRANSPORTING VEHICLE
This vehicle is NOT designed to be towed.
It is recommended that the vehicle be moved by placing
the entire vehicle on a trailer, flat bed truck or other suit-
able transport.
Before pushing inoperative vehicle set the Run-Tow/Maintenance/Storage switch to the TOW/MAINTENANCE/
STORAGE position to prevent damage to the electric motor and controller.
The Run-Tow/Maintenance/Storage switch is located behind the access panel in the center of the dashboard.
Remove two phillips head screws and swing the panel downward to access the switch. Set the switch to the TOW/
MAINTENANCE/STORAGE position before moving an inoperative vehicle, before performing battery maintenance,
repairs or for prolonged storage.
The TOW/MAINTENANCE/STORAGE position allows the vehicle to roll freely without activating the warning beeper
and eliminating potential damage to the controller or motor. In the TOW/MAINTENANCE/STORAGE position all
power to the motor and controller are shut off.
FUSE
#
SIZE
FOR
PART
NUMBER
1
32V
5AMP
Turn Signals, Brake/Tail Lights,
Park Brake Light
35212G01
2
32V
15AMP
Headlights
35212G01
3
32V
15AMP
Horn
35212G01
Summary of Contents for E-Z-GO Cushman TITAN 36V HD
Page 1: ...Owner s Guide Titan LD HD Electric 635592 B Issued NOVEMBER 2013 Revised JULY 2018...
Page 57: ......
Page 58: ......