background image

Greenlee / A Textron Company

4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

2

EK410LT and EK410LX Battery-powered Crimping Tools

Description

The EK410LT and EK410LX Battery-powered Crimping 

Tools are hand-held, self-contained crimping tools 

 intended to crimp copper and aluminum cable with 

KC4-type dies.
Both the T and X versions of this tool have Bluetooth

®

 

connectivity and an LCD screen. Only the T version has 

GPS tracking.
These tools are protected by U.S. Patent No. 6,276,186, 

6,401,515, 6,718,870, 7,086,979, and 7,254,982.

EK410LT—FCC ID: 2AGL2COM; IC ID: 20646COM 

EK410LX—FCC ID: 2AGL2CFM; IC ID: 20646CFM

This device complies with Part 15 of the FCC Rules. 

Operation is subject to the following two conditions: 

(1) this device may not cause harmful interference, and 

(2) this device must accept any interference received, 

including interference that may cause undesired 

operation.

Safety

Safety is essential in the use and maintenance of 

Greenlee tools and equipment. This manual and any 

markings on the tool provide information for avoiding 

hazards and unsafe practices related to the use of this 

tool. Observe all of the safety information  provided.

Purpose of this Manual

This manual is intended to familiarize all personnel with  

the safe operation and maintenance procedures for the 

following Greenlee tools:
•  EK410LT Battery-powered Crimping Tool
•  EK410LX Battery-powered Crimping Tool
Keep this manual available to all personnel.
Replacement manuals are available upon request  

at no charge at www.greenlee.com.

Do not discard this product or throw away!

  

For recycling information, go to www.greenlee.com.

KEEP THIS MANUAL

Table of Contents

Description ..................................................................... 2
Safety ............................................................................. 2
Purpose of this Manual .................................................. 2
Important Safety Information ..................................... 3–4
Identification ................................................................... 5
Specifications ................................................................. 5
Operation .................................................................... 6–7
Die and Connector Selection ......................................... 8
LCD Screen .................................................................... 9
Maintenance ................................................................. 10
Troubleshooting ............................................................ 11

All specifications are nominal and may change as design 

improvements occur. Greenlee Textron Inc. shall not be liable for 

damages resulting from misapplication or misuse of its products.
GATOR is a registered trademark of Textron Innovations Inc.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Blackburn is a registered trademark of Thomas & Betts.

Summary of Contents for Greenlee GATOR EK410LT













Reviews: