Instruction
Manual
ESSG
page
17
___________________________________________________________________________
Index
1.
Introduction
2.
Labels
3.
Warranty
4.
Description of the hydraulic cutting unit
4.1. Description of components
4.2.
Description of the light diode display
4.3.
Description of the operation and control functions
4.4. Description of the connecting devices
4.5. Description of the cutting procedure
5.
Remarks in respect to the determined use
5.1. Operation of the units
5.2. Explanation of the application range
5.3. Remarks in respect of alternative means to determine live lines
5.4. Service and Maintenance instructions
5.5. Oil changing cycles
5.6. Reference, as to which (spare-) parts can be exchanged by the customer.
5.7. Storage and transport of the cutting unit
6.
Troubleshooting
7.
How to act after a short circuit
8.
Remarks on the use of the Battery Cartridge and Charger
9.
Putting out of service/waste disposal
10.
Technical data
1. Introduction
Attention
Before starting to use the unit please read the instruction manual carefully.
Use this unit only for approved operations.
Cutting of cables with this equipment must only be done by specially trained personnel.
This instruction manual must remain with the unit for the whole time.
The operator must
- guarantee the availability of the instruction manual for the user and
- make sure that the user has read and understood the instruction manual.
Prior using the safety cutting unit for the first time and afterwards at least once annually the
user of this unit must be instructed by a safety engineer about the special risks involved while
working with this unit and the necessary precaution measurements.
Summary of Contents for Klauke ESSG120/2
Page 42: ......
