Instruction
Manual
ESSG
page
18
___________________________________________________________________________
2. Labels
On the cutting head there is a label with the type specification, the max. approved operating
pressure, the max. cutting diameter, the notification of the matching pump, the symbol with
the notification of the nominal voltage range and the company logo of the manufacturer.
Beyond this there is a serial number on the cutting head consisting of the year of
construction (first 2 figures) and the batch # (last 4 figures).
This pump is provided with the following decals:
The serial number of the pump is located on the pump cylinder. In the serial # there is a date
code consisting of 2 letters stating month and year of manufacturing. YK e.g. stands for
October 2005. The code is available upon request.
Insulated hose:
Batch No XXX Europower ( CEJN ) 852 DN4 Q .. WP 700 BP 2800 BAR
Batch No.xx
produktion serial number
Europower or CEJN manufacturer of the hose
852
type of hose
DN4 nominal
width
.Q..
quarter and Year of production
W.P. 700 BAR
max. approved operating pressure of the hose 700 BAR
BP 2800 BAR
bursting pressure 2800bar
Marking on the fittings of the insulating hose (with markings):
with: -
Manufacturer-Logo
- Month and year of assembly
- Double-triangel
- max. operating pressure
(the pressure of 625 bar will not be exceeded during operation)
Schneidkopf/cutting head:
SSK85/3
max. Betriebsdruck/~pressure: 625 bar
max. Schneid-/cutting
∅
: 85
mm
Antriebsaggregat/drive unit:
ESSG
Baujahr/year of construction: 2006
Keine stahlbewehrten Kabel schneiden!
Do not cut reinforced cables!
Type specification
Logo and/or company name
max. operating pressure
max. cable-
∅
to be
cut with this tool
Type specification - pump
Antriebsaggregat/drive unit:
ESSG
Akku/Battery: RA4
max. Betriebsdruck/pressure: 625 bar
zugehörige Schneidköpfe/
SSK85/3
corresponding heads:
SSK90/2
SSK120/2
Nicht im Regen verwenden/Do not operate in rain!
Type specification
Logo and/or company name
Battery to be used with the unit
Type specification
– cutting heads
Year the head is built
max. operating pressure
Tools with this sign can be operated on or near live
lines with up to 60 kV.
Tools with this sign can be operated on or near live
lines with up to 60 kV.
Summary of Contents for Klauke ESSG120/2
Page 42: ......
