HE.8217_C © 10/2011
1
SDG45 / SDG45C
GB
Instruction Manual
Index
1.
Introduction
2.
Warranty
3.
Description of the hydraulic cutting tool
4.
Remarks in respect to the determined use
4.1. Operation of the units
4.2. Explanation of the application range
4.3. Service and Maintenance instructions
4.4. Reference as to which spare parts can be exchanged by the customers
5.
Troubleshooting
6. Technical
data
Symbols
Safety warnings
Please do not disregard these instructions in order to avoid human injuries and environmental damages.
Operational warnings
Please do not disregard them to avoid damaging the pump unit.
1. Introduction
Before starting to use the tool please read the instruction manual carefully.
Use this tool exclusively for its determined use.
Cutting of cables with this tool must only be performed by specially trained personnel. The minimum age is 16 ye-
ars.
This instruction manual must remain with the unit for the whole time.
The operator must
• guarantee the availability of the instruction manual for the user and
• make sure that the user has read and understood the instruction manual.
