HE.14338_A © 05/2012
SDK20 / SDK20P33 / SDK20P33M
4.4 Remarks which (spare) parts are allowed to be changed by the customer.
Within the warranty period the customer is not allowed to make repairs on their own. Do not remove parts such as
screws and other components.
5. Trouble Shooting
When the cutting head is leaking hydraulic oil the cutting head must be sent to one of our authorized service centers
(ASC‘s).
If the blades should get stuck when cutting
fi
ne stranded cables
e.g. AHP 700-L
the blades can be released using a screw driver as shown in the
picture to the right. Move the screw driver in the direction of the
arrow while simultaneously actuating the Emergency stop button
on the pumping unit until the piston retracts automatically..
pic.
similar
6. Technical Data
Cutting range:
max. 20 mm
Weight:
approx. 1,4 kg
Hydraulic oil:
Rivolta S.B.H. 11
Operation pressure:
700 bar
Note
Additional copies of this instruction manual are available upon request. The part # is HE.14338.
The Instruction Manual can also be downloaded from our Homepage www.klauke.textron.com.
+
4
GB
Instruction Manual
authorised
copy
