26
2. Middle Button - Shifts middle dis-
play through speedometer, RPM,
clock, odometer, trip 1, trip 2, and
engine hours.
3. Right Button - Shifts bottom display
through coolant temperature, bat-
tery voltage, intake air temperature,
and fuel level.
4. Speedometer/Tachometer/Clock
Display - Indicates approximate
vehicle speed in MPH or KM/H
when speedometer function is
selected, RPM when tachometer
function is selected, or time when
clock is selected. Press the Left But-
ton to change which parameter is
being displayed. With speedometer
selected, press and hold the Left
Button to shift between standard
(MPH/miles/Fahrenheit) and metric
(km/h/kilometers/Celsius).
With the clock mode selected, press
and hold the Left Button to set the
clock. The option of selecting the
12-hour or 24-hour clock is avail-
able; press the Left Button to alter-
nate between the two modes. Next,
press the Middle Button to set the
clock. Press the Left or Right to set
the hours; then press the Middle
Button to set the minutes. Press the
Left or Right Button to set the min-
utes. When the proper time has been
set, press the Middle Button to
return to the main gauge display.
5. Engine Hour Meter/Odometer/Trip
Meter/Speedometer/Tachometer/
Clock Display - Displays engine
hours, odometer, trip meter, speed-
ometer, tachometer, or clock. Press
the Middle Button to change which
parameter is being displayed. The
Engine Hour Meter and Odometer
cannot be reset. To reset the trip
meter, select the Trip Meter; then
press and hold the Middle Button
until the trip meter display reads 0.
NOTE: The engine hour meter will
not activate until engine speed
exceeds 500 RPM.
NOTE: An item can only be dis-
played in this position if it is not
already being displayed in the top
display. To set the clock when the
clock is in this position, press and
hold the Middle Button; then use the
procedure found in step 4.
6. Coolant Temperature/Battery Volt-
age/Intake Air Temperature/Fuel
Level Display - Displays coolant
temperature, battery voltage, intake
air temperature, and fuel quantity.
Press the Right Button to change
which parameter is being displayed.
Press and hold the Right Button to
see the actual values associated with
the mode selected.
NOTE: High engine RPM, low vehi-
cle speed, or heavy load can raise
engine temperature. Decreasing
engine RPM, reducing load, and
selecting an appropriate transmis-
sion gear can lower the temperature.
NOTE: Debris in the engine com-
partment (or packed between the
cooling fins of the radiator) can
reduce cooling capacity. Using a gar-
den hose, wash the radiator and the
engine to remove any debris pre-
venting air flow.
7. Gear Position Indicator - Indicates
which gear is selected.
CAUTION
Continued operation with high engine
temperature may result in engine
damage or premature wear.
CAUTION
Do not use a pressure washer to
clean the radiator core. The pressure
may bend or flatten the fins causing
restricted air flow, and electrical com-
ponents on the radiator could be
damaged. Use only a garden hose
with spray nozzle at normal tap pres-
sure.
