EC Declaration of Conformity
The Undersigned Manufacturer:
Schiller Grounds Care, Inc.
One Bob-Cat Lane
Johnson Creek, WI 53038
EU Authorized Representative:
Earlsmere Limited
Unit 18 Valley Road
Station Road Industrial Estate
Wombwell, Barnsley, South Yorkshire, S73 OBS UK
Notified Body:
AV Technology Ltd
AVTECH House, Arkle Avenue
Stanley Green Trading Estate
Handforth, Cheshire, SK9 3RW UK
Declare that the machine described below:
Make & Type: ..................................................
BobCat, Hydro Midsize
Category: ........................................................
Lawnmower, Walkbehind, Side Discharge
Series: ............................................................
933304J
Engine: ...........................................................Kawasaki,
FS541V-AS52
Speed: ............................................................
2850 R.P.M
Net Installed Power ........................................
13.4 KW (18HP)
Operation Width: ............................................
914mm (36”)
Complies with the provisions of the following European Directives and Amendments and the Regulations transposing it into
national law:
Machinery Directive ..................................................................
2006/42/EC
EMC Directive ..........................................................................
2004/108/EC
Noise in the Environment Directive ..........................................
2000/14/EC - Annex VI Procedure 2
Vibration Directive ....................................................................
2002/44EC
Non Road Emissions ................................................................
2002/88/EC
Pedestrian Controlled lawnmowers ..........................................
EN836
Sound:
Sound levels were determined in accordance with Directive 2000/14/EC and standards EN13684
and ISO 11094.
Measured Sound power level: .............................Model 933304J……
98 dB
Guaranteed Sound power level: ..........................Model 933304J……..
99 dB
Operator Ear: ..........................Model 933304J……..
84 dB
Vibration:
Hand/arm vibration was measured at the right and left operator handles per ISO 5349-1-2001 and ISO 5349-2-2001.
Vibration is given as the vector sum of acceleration in the x, y and z axes. Only the highest of the left and right read-
ings is given.
Guaranteed Vibration level …………4.64 m/s2
Intended Use and Limits:
This machine is for use cutting grass on normally maintained grass covered areas as a walk-behind lawnmower. Loss
of control may result on steep slopes. Before operating on a slope, evaluate the risks involved.
4173362 REV A
Kurt Knudsen
Director of Operations
Date: 21st January, 2016
Jim White
Managing Director
Date: 21st January, 2016
