B
FUEL SYSTEM
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
133
Repair and Service Manual
668061
NOTICE: Always dispose of fuel safely.
4.
Disconnect the fuel pump wire located at the top of
Fig. 3 Fuel Pump Wire
Fig. 4 Fuel Tank Connections
5.
Disconnect the fuel line from the tank by pressing the
button on the fuel line connector while pulling the
connector away from the tank (See Fig. 4). Plug the
fuel line to prevent fuel leakage.
6.
Disconnect the vent tube (See Fig. 5).
Fig. 5 Fuel Vent
7.
Remove the hold down straps (See Fig. 6).
Fig. 6 Fuel Tank Removal
8.
Remove the fuel tank.
9.
Installation is in reverse order of removal.
NOTICE: Make sure that the fuel line and vent line
are not kinked or restricted by wire ties, etc.
Fuel Pump Assembly
Tool List
Qty.
Strap Wrench...............................................................1
NOTICE: The electric fuel pump, fuel filter, float and
fuel gauge sending unit are integrated into one com-
plete assembly (See Fig. 2). If any of these compo-
nents fail, the complete assembly must be replaced.
1.
Remove the fuel tank.
2.
Remove the pump assembly (3) by removing the
hold-down ring (4) (See Fig. 1).
3.
Pull the fuel pump assembly up and out of the fuel
tank.
4.
With the fuel pump assembly removed, inspect the
hold-down ring seal (5) for damage. Replace as nec-
essary.
5.
Installation is in the reverse order of disassembly.
Fuel Line
Fuel Pump
Wire
Fuel Line
Connector
Press button
to disconnect.
Fuel Vent
Tube
Remove fuel tank
hold down straps.
Summary of Contents for Stampede 900 2017
