APPENDIX A
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
E
Repair and Service Manual
CAN
C1029
Vehicle Speed
Max
This fault will set if a speed is detected above the
vehicle speed max calibration for longer than the
max time calibration.
This fault is only checked for the
“CAN”, “CAN (no RPM), “discrete”,
and “discrete (NO RPM)” signal type
selection. RPM is used to estimate
speed.
25%
Reduction
C1030
Engine RPM
Max
This fault will set if an RPM is detected above the
engine RPM max calibration for longer than the
max time calibration.
This fault is only checked for the
“CAN” and “discrete” signal type
selection.
Bridge On
C1031
Unused
ID
Name
Period
Data
0x520
Diag - EPAS to Tool
On Demand
Varies
0x524
Diag - Tool to EPAS
On Demand
Varies
0x521
Feedback1
100ms
Input Torque(0-1), Commanded Output Assist(2-3), Com-
manded Current(4-5), Temperature(6)
0x522
Feedback2
100ms
Internal MPH(0-1), Internal RPM(2-3)
0x523
Fault
1s
Fault Status (in order in 2 bit increments)
0x540
Command Message
On Demand
Varies
0x81
Vehicle Speed Message
Periodic less than CAN Time-
out calibration
Engine RPM(1-0), Vehicle Speed(3-2)
Summary of Contents for Stampede 900 2017
